Prisvindende Hifi

Kraftfuldt system til attraktiv pris. Højttalerne er Eltaxs prisvindende Monitor III højttalere, som efterhånden har opnået ikonisk status indenfor lydbranchen for sin utrolige værdi for pengene. 

AWIAs stereo forstærker har 2 x 60 watt RMS og et væld af tilslutningenmuligheder. Der kan sættes pladespiller direkte til, da anlægget har indbygget forforstærker og dertil 3 x RCA analog indgang. På den digitale side, så har stereo forstærkeren mulighed for bluetooth streaming og USB afspilning. 

Specifikationer

Eltax Monitor III: 

2 vejs basreflex
90/150 Watt
50 – 22.000Hz
89 db
4 – 8 ohm
25mm soft dome
130mm bas, magnetisk afskærmet
Dimensioner (H x B x D): 300 x 195 x 230mm

AIWA: 

General Specifications
120 W RMS STEREO AMPLIFIER with BLUETOOTH and USB/SD-MP3 Player.
Suitable for all type of place ambients.
Anodized Aluminium front panel (Brushed Hairline Finishing).
Digital Rotary Aluminium Controller for Volume/Treble/Bass/Balance Control with digital readout.
White LED Ambient Light Bar (3D PRISM type) under display on front panel.
LOUDNESS Control button for Audio EQ Enhancement at Night-time.

Connection Specifications
BT v5.0 Receiver Built-In with Scrolling Media Info on dot-matrix display and 10 mts wireless range.
USB-port + SD-Card slot (in front panel) for MP3 playback, up to 128GB memory readable, with Scrolling id3-Tag song info on display.
7 ANALOG AUDIO INPUTS : PHONO (MM), CD/SACD, AUX-IN 1, AUX-IN 2, AUX-IN 3, MIC, BT.
Rec-Out/Line-Out Analog Stereo Output Included.
6.35mm (1/4 inch) STEREO Headphone-Output Jack built-in.
6.35mm (1/4 inch) MICROPHONE-Input Jack built-in.
QUAD Speaker Connections (with Selector for 2x Stereo Speakers A and B).
Phono Input with Built-In Pre-Amp and RIAA EQ, with Phono Ground (GND).
Terminal Connection.

Audio Specifications
Output power 120W (2x 60W RMS ).
Tone control BASS & TREBLE independant adjustments +/- 10dB.
CHANNEL SEPARATION >80dB@1kHz.
High Quality FET Power Amplifier circuit (S/N for AUX–In > 100dB, S/N for USB+SD/MP3 and Phono–In >83dB).
Gold Plated A and B Non Magnetic Speaker Terminals. Impedance= A/B speaker : 4-8 ohm，A+B speaker : 8-16 ohm.

Features
DIRECT button for EQ Bypass.
Fully Alphanumeric 16 char x 2 lines dot matrix display with White-LED backlighting and Tinted Prism Lens.
Anodized Aluminium front panel (Brushed Hairline Finishing).
ANTI-VIBRATION RISER Feet with Rubber (Silicone) Pads.
Full Function Remote Controller in Metallic Finishing with Silicone Rubber Buttons, including MP3/BT Playback controls.
Built In DUAL Power Supplies ( SMPS for Standby Mode, Toroidal Transformer for Main Operation).
Hardware ON/OFF Toggle Master Power Switch included.
Dimensions 430 x 100 x 292mm.
Weight: 6,5 Kg.
Extra Long AC-Power Cord : 2 mts Length.